The use of paint stripping wire wheel needs to pay attention to the following aspects:

1. Handling and storage

The steel wheel must be carefully handled during handling to avoid damage caused by impact or falling.

It is recommended that the steel wire wheel be stacked flat on the wooden support plate or wooden frame, and the stacked height should not exceed 1.2 meters.

The packaging of the steel wheel is only opened before use, so that the unused need to be sealed to prevent moisture and oxidation.

Second, installation and commissioning

When loading and unloading the steel wheel, be sure to cut off the power or air source of the host first to ensure safe operation.

When installing, ensure that the protective cover is firm to prevent the splashes of broken metal bodies.

When installing the wire wheel on the power shaft, it is necessary to put the CAM flange and insert the wire wheel, and then tighten the nut with a special tool. Pay attention to the direction of the CAM flange towards the wire wheel and the tightening direction of the nut.

Third, the use of operation

When using, you must wear the specified safety cover, protective work clothes, safety mask and protective gloves to ensure personal safety.

Check whether the main machine (pneumatic, electric) is consistent with the steel wheel model used to avoid damage or inefficiency caused by mismatching.

Should be used within the allowable safety factor of the wire wheel speed range, too high speed may cause the wire wheel to overheat or be damaged.

When installing the new steel wheel, it should be allowed to rotate empty for 3 minutes first, in order to throw away the residual broken wire around the product.

During use, excessive force impact should be avoided to extend the service life of the wire wheel and prevent danger.

Fourth, maintenance and maintenance

Check whether the steel wheel is damaged or cracked regularly, and replace the new steel wheel in time if there is damage.

Select the appropriate steel wheel according to the working environment, workpiece material and working requirements, including the correct outside diameter, thickness, aperture and speed parameters.

Keep the working area clean and tidy, timely clean up the resulting cutting chips, dust and other debris, in order to reduce the occurrence of accidents and equipment damage.

Regular maintenance and maintenance of the steel wheel, including cleaning the surface of the steel wheel, lubrication of bearings and key components, etc., to ensure its normal use and extend the service life.

To sum up, pay attention to the details and requirements of handling, storage, installation and commissioning, operation and maintenance when using the paint stripping steel wheel to ensure the safe and efficient completion of the paint stripping work.