TC-91 High performance electric enameling wire stripping machine, unique design of "full contact" high-speed grinding wheel, can automatically adjust the arc of the wire body, can completely remove any hard insulating paint on the wire surface, without damaging the copper wire itself. In the absence of serious pollution and harm, peeling paint work is fast and safe. Suitable for wire diameter range: 0.10mm-3.8mm above, (adjustment device has been improved) suitable for round and square wire, and can handle multiple strands of enameled wire at the same time. Easy to operate, excellent effect. Dongguan enamelled wire stripping machine manufacturers, Dongguan enamelled wire stripping machine manufacturers

< td width = "231" valign = "top" > < p > 0.10 3.8 mm < / p > < / td > < td width = "231" valign = "top" > < p > nylon fiber wheel or wire wheel < / p > < / td >

Machine type	TC-91	Applicable wire diameter
Machine size	420 x 280x 240mm	Operating voltage	220v/50Hz
Motor power	550w	turn       Speed	3330r/min
Machine weight	28kg	Select accessories
Belt size	750x30x2mm	Strip length	3mm- unlimited

Installation and use:

Install a suitable grinding wheel on the machine, put one or more enameled wire in the middle of the two grinding wheels, adjust the two grinding wheels until the enameled wire is gently squeezed, hold the coil part by hand and then start the switch, test the peeling (peeling) paint effect, you can adjust the pressure between the grinding wheels contact surface, control to achieve the ideal peeling (peeling) paint effect. When working, the enameled wire is placed between the two grinding wheels, and then the enameled wire is easily pulled out from between the grinding wheels, and the paint removal work is completed. After stripping the enamelled wire, the surface of the copper wire is bright and clean.

Description:

This machine can strip paint wire diameter such as: 0.30mm or so 30 head. While improving machine products, supporting products also need to keep up at the same time. But it should be noted that different manufacturers have different products. It is inevitable that there is a great tension in the process of operation. The wire diameter is thick, the wire end is more, the next consideration is to cooperate with the manufacturer to further improve the matching fixture. Cooperate with the technical personnel of the manufacturer to develop the operation process.

In addition to the selection of steel wheel, the machine can also choose the appropriate stripping fiber wheel. The starting step requires leveling the parallelism between the two wheels. The specific method is: according to the special mesh sand size, adjust the gap between the two rounds, start the power supply, and repair the flatness of the two rounds with the mesh sand. At the same time, the adjustment device should also cooperate. The levelled wheel is ready for work. Suitable for peeling paint line diameter: 0.1-0.93mm range. Thin wire can be carried out in multiple strands and is widely used in copper (aluminum) wire and copper-covered aluminum wire. The surface after painting is bright, copper (aluminum) wire or copper-covered aluminum wire itself is absolutely no harm, the majority of users can be assured of bold use according to their own choices.